media server logo
PricingAPI docsSign inLaunch SRT gateway

PTZOptics SRT Gateway Workflows with Callaba

Jun 30, 2026
Iurii Pakholkov, founder of Callaba

Written by Iurii Pakholkov

Founder of Callaba. Building cloud video tools for SRT, RTMP, WebRTC, NDI, live routing, monitoring, recording, and production workflows.

SRT Gateway vendor hub · Last updated: June 30, 2026

PTZOptics SRT gateway workflows connect PTZ cameras, remote cameras, studio feeds, venue monitoring, browser Multiview workflows to a controlled live video operations layer. PTZOptics SRT workflows are often used for remote cameras, venue feeds, and production monitoring. Callaba provides the SRT listener, live statistics, preview, recording, routing, and browser Multiview layer after the camera sends the feed.

Quick answer: where Callaba fits

Use the PTZOptics device or platform for the source-side job, then use Callaba as the SRT listener, cloud gateway, private gateway, recorder, Multiview surface, playback layer, route controller, and API-controlled operations plane.

PTZOptics guides

Choose the PTZOptics SRT workflow you are building

Each guide focuses on one source or device family. Use this page as the parent hub when you are comparing which PTZOptics workflow belongs in the live path.

Workflow pattern

PTZOptics source to Callaba SRT gateway

Source side

PTZOptics device or platform

Encode, contribute, decode, or hand off the live feed from the production edge.

→

Callaba gateway

Receive, monitor, route, record, recover

Use SRT stats, preview, Multiview, output state, failover, and API control to operate the stream.

→

Outputs

Multiview, recording, playback, partner output, backup path

Turn one contribution boundary into a workflow the team can inspect and reuse.

Setup checklist for PTZOptics SRT workflows

  1. Confirm the exact PTZOptics model, firmware, role, output type, and SRT support before the event.
  2. Create a Callaba SRT server and choose the listener port, latency, stream ID, and passphrase policy.
  3. Open the required UDP port or port range on the firewall, AWS security group, or private network boundary.
  4. Configure the PTZOptics source as SRT Caller for most cloud workflows, then point it to the Callaba host and port.
  5. Verify connection state, incoming bitrate, RTT, packet loss, preview, audio, and recording before relying on the feed.
  6. Only after ingest is stable, add Multiview, playback, routing, partner output, failover, or API automation.