Choose a Canon model for your SRT Gateway workflow
More live video workflow notes and product updates.
Written by Iurii Pakholkov
Founder of Callaba. Building cloud video tools for SRT, RTMP, WebRTC, NDI, live routing, monitoring, recording, and production workflows.
SRT Gateway vendor hub · Last updated: July 22, 2026
Choose the exact Canon model before you configure the gateway. This hub owns Canon vendor and model selection; each linked model guide owns only that device's setup procedure. After confirming the production model, firmware, and supported SRT role, use Callaba SRT Server as the product layer for receiving the contribution feed, monitoring connection health, previewing it, recording it, routing it, and adding it to Multiview.
Quick answer: where Callaba fits
Use the Canon device or platform for the source-side job, then use Callaba as the SRT listener, cloud gateway, private gateway, recorder, Multiview surface, playback layer, route controller, and API-controlled operations plane.
Canon guides
Choose the exact Canon model guide
This hub owns vendor and model selection. Each linked leaf owns only its exact-model setup procedure, so confirm the production unit and firmware before following device-specific fields.
Product next step
Run the selected Canon workflow through Callaba SRT Server
After you choose the exact model guide and confirm its supported SRT role, continue to the Callaba product page to plan monitored ingest, preview, recording, routing, and Multiview. The model guides remain the owners of device-specific setup steps.
Cloud and self-hosted deployment choices stay secondary to this product decision and follow after the article content.
Workflow pattern
Canon source to Callaba SRT gateway
Source side
Canon device or platformEncode, contribute, decode, or hand off the live feed from the production edge.
Callaba gateway
Receive, monitor, route, record, recoverUse SRT stats, preview, Multiview, output state, failover, and API control to operate the stream.
Outputs
Multiview, recording, playback, partner output, backup pathTurn one contribution boundary into a workflow the team can inspect and reuse.
Setup checklist for Canon SRT workflows
- Confirm the exact Canon model, firmware, role, output type, and SRT support before the event.
- Create a Callaba SRT server and choose the listener port, latency, stream ID, and passphrase policy.
- Open the required UDP port or port range on the firewall, AWS security group, or private network boundary.
- Configure the Canon source as SRT Caller for most cloud workflows, then point it to the Callaba host and port.
- Verify connection state, incoming bitrate, RTT, packet loss, preview, audio, and recording before relying on the feed.
- Only after ingest is stable, add Multiview, playback, routing, partner output, failover, or API automation.
