Matrox SRT Gateway Workflows with Callaba

Jun 30, 2026

Callaba on LinkedIn

More live video workflow notes and product updates.

Written by Iurii Pakholkov

Founder of Callaba. Building cloud video tools for SRT, RTMP, WebRTC, NDI, live routing, monitoring, recording, and production workflows.

SRT Gateway vendor hub · Last updated: June 30, 2026

Matrox SRT gateway workflows connect source-side jobs such as Maevex, Monarch EDGE, appliance encoding, production ingest, monitored outputs to a controlled live video operations layer. Matrox appliances are often used where production teams need dedicated contribution or encoding hardware. Callaba provides the receiving gateway and operational layer after the Matrox output leaves the source side.

Quick answer: where Callaba fits

Use the Matrox device or platform for the source-side job, then use Callaba as the SRT listener, cloud gateway, private gateway, recorder, Multiview surface, playback layer, route controller, and API-controlled operations plane.

Matrox guides

Choose the Matrox SRT workflow you are building

Each guide focuses on one source or device family. Use this page as the parent hub when you are comparing which Matrox workflow belongs in the live path.

Matrox Maevex with Callaba: SRT, multiview, recorder and playbackBring Matrox appliance output into Callaba and operate the feed with Multiview, recording, playback, and API control.Matrox Monarch EDGE SRT setup with Callaba GatewayBring Matrox appliance output into Callaba and operate the feed with Multiview, recording, playback, and API control.

Workflow pattern

Matrox source to Callaba SRT gateway

Source side

Matrox device or platform

Encode, contribute, decode, or hand off the live feed from the production edge.

→

Callaba gateway

Receive, monitor, route, record, recover

Use SRT stats, preview, Multiview, output state, failover, and API control to operate the stream.

→

Outputs

Multiview, recording, playback, partner output, backup path

Turn one contribution boundary into a workflow the team can inspect and reuse.

Setup checklist for Matrox SRT workflows

Confirm the exact Matrox model, firmware, role, output type, and SRT support before the event.
Create a Callaba SRT server and choose the listener port, latency, stream ID, and passphrase policy.
Open the required UDP port or port range on the firewall, AWS security group, or private network boundary.
Configure the Matrox source as SRT Caller for most cloud workflows, then point it to the Callaba host and port.
Verify connection state, incoming bitrate, RTT, packet loss, preview, audio, and recording before relying on the feed.
Only after ingest is stable, add Multiview, playback, routing, partner output, failover, or API automation.