media server logo
PricingSign inLaunch SRT gateway

Haivision SRT Gateway Workflows with Callaba

Jun 30, 2026
Iurii Pakholkov, founder of Callaba

Written by Iurii Pakholkov

Founder of Callaba. Building cloud video tools for SRT, RTMP, WebRTC, NDI, live routing, monitoring, recording, and production workflows.

SRT Gateway vendor hub · Last updated: June 30, 2026

Haivision SRT gateway workflows connect source-side jobs such as remote contribution, enterprise contribution, Makito hardware, StreamHub handoff, mobile SRT feeds to a controlled live video operations layer. Haivision systems are often used at the contribution edge: field encoders, mobile contribution, StreamHub workflows, and Makito hardware. Callaba fits after that edge as the SRT receiving, monitoring, routing, recording, Multiview, playback, and API control layer.

Quick answer: where Callaba fits

Use the Haivision device or platform for the source-side job, then use Callaba as the SRT listener, cloud gateway, private gateway, recorder, Multiview surface, playback layer, route controller, and API-controlled operations plane.

Haivision guides

Choose the Haivision SRT workflow you are building

Each guide focuses on one source or device family. Use this page as the parent hub when you are comparing which Haivision workflow belongs in the live path.

Haivision StreamHub SRT setup with Callaba GatewayPlan the StreamHub handoff into Callaba, then verify listener settings, SRT health, preview, and downstream outputs.Haivision Play Pro SRT setup with Callaba GatewayConnect the mobile Haivision Play Pro contribution workflow to Callaba for field ingest, live checks, recording, and browser monitoring.Haivision MoJoPro SRT setup with Callaba Gateway via StreamHubConnect the mobile Haivision MoJoPro via StreamHub contribution workflow to Callaba for field ingest, live checks, recording, and browser monitoring.Haivision Air220-5G SRT setup with Callaba Gateway via StreamHubUse Haivision Air220-5G via StreamHub for bonded or mobile contribution, then confirm SRT arrival, RTT, bitrate, and failover-ready routing in Callaba.Haivision Air320e-5G SRT setup with Callaba Gateway via StreamHubUse Haivision Air320e-5G via StreamHub for bonded or mobile contribution, then confirm SRT arrival, RTT, bitrate, and failover-ready routing in Callaba.Haivision Pro460 SRT setup with Callaba Gateway via StreamHubConnect Haivision Pro460 via StreamHub to Callaba with device-specific SRT settings, live telemetry, preview, recording, and routing notes.Haivision Pro360-5G SRT setup with Callaba GatewayUse Haivision Pro360-5G for bonded or mobile contribution, then confirm SRT arrival, RTT, bitrate, and failover-ready routing in Callaba.Haivision Makito X4 SRT setup with Callaba GatewayMap Haivision Makito X4 into a reliable SRT ingest path with listener ports, stream ID policy, monitoring, and reusable outputs.Haivision Makito X4 Decoder SRT setup with Callaba GatewaySet up Haivision Makito X4 Decoder around decoder or return-feed workflows, with Callaba handling the monitored SRT control point.Haivision Makito X4 Rugged SRT setup with Callaba GatewayMap Haivision Makito X4 Rugged into a reliable SRT ingest path with listener ports, stream ID policy, monitoring, and reusable outputs.Haivision Makito X1 Rugged SRT setup with Callaba GatewayMap Haivision Makito X1 Rugged into a reliable SRT ingest path with listener ports, stream ID policy, monitoring, and reusable outputs.

Workflow pattern

Haivision source to Callaba SRT gateway

Source side

Haivision device or platform

Encode, contribute, decode, or hand off the live feed from the production edge.

→

Callaba gateway

Receive, monitor, route, record, recover

Use SRT stats, preview, Multiview, output state, failover, and API control to operate the stream.

→

Outputs

Multiview, recording, playback, partner output, backup path

Turn one contribution boundary into a workflow the team can inspect and reuse.

Setup checklist for Haivision SRT workflows

  1. Confirm the exact Haivision model, firmware, role, output type, and SRT support before the event.
  2. Create a Callaba SRT server and choose the listener port, latency, stream ID, and passphrase policy.
  3. Open the required UDP port or port range on the firewall, AWS security group, or private network boundary.
  4. Configure the Haivision source as SRT Caller for most cloud workflows, then point it to the Callaba host and port.
  5. Verify connection state, incoming bitrate, RTT, packet loss, preview, audio, and recording before relying on the feed.
  6. Only after ingest is stable, add Multiview, playback, routing, partner output, failover, or API automation.
Typical live workflow

Haivision contribution through Callaba SRT Gateway

A compatible Haivision source sends a live SRT contribution feed to Callaba, where operators can monitor the connection and route the stream to configured destinations.

Contribution source

  • Haivision hardware or source

    A compatible camera, encoder, or field unit sends the live contribution feed.

    SRT source
Callaba SRT Gateway

Receives the SRT feed and provides routing and operational visibility.

Ingest and control

Monitoring and delivery

  • Stream monitoring

    Operators inspect the incoming stream and connection status.

  • Configured delivery

    Callaba routes the feed to the selected production or distribution destination.

Exact SRT modes, stream settings, and available outputs depend on the source device and the configured destination.

Choose where to run Callaba SRT Gateway

Continue with an AWS deployment or review the self-hosted path for your infrastructure.

Launch Callaba SRT Gateway on AWSRun Callaba on your infrastructure