An NDI adapter bridges a verified input into the NDI network. Keep source diagnosis and NDI discovery separate so each side can be tested independently.
开始之前
A working supported input source.
Saved NDI network configuration and a receiver on the target network.
A unique NDI output name understood by the production team.
设置说明
仅解释操作员需要的控件；内部字段名和实现事件不会显示。
Adapter
Identify and control the bridge.
- Name
Operator-facing adapter name.
- Active
Start or stop the managed adapter.
- Input source
Select the SRT, RTMP or conference participant preset.
- NDI output name
Name advertised to downstream NDI receivers.
安全的首次工作流
- 01
Verify the input in its owning SRT, RTMP or Video Call module.
- 02
Create the adapter and select the exact input resource or participant.
- 03
Set a unique NDI output name and start the adapter.
- 04
Discover the name on the downstream switcher or NDI monitor.
- 05
Check adapter statistics and receiver playback together.
工作流示例
Bring an SRT contribution feed into an NDI studio
A remote SRT encoder must become a local NDI source.
构建方法
- 1
Validate the SRT publisher, bitrate and RTT.
- 2
Create an NDI adapter using that SRT source.
- 3
Start the adapter with a production-friendly NDI name.
- 4
Discover and monitor the named source on the studio network.
Expose a browser guest as NDI
One conference participant should be mixed independently.
构建方法
- 1
Verify the participant media in the room.
- 2
Select the exact participant in the adapter input.
- 3
Start the NDI output and discover it downstream.
- 4
Confirm the source follows the intended participant, not the full room.
验证结果
- The adapter reports an active source.
- The intended NDI name is discoverable downstream.
- Video and audio match the selected input.
故障排除
The adapter is active but no NDI receiver sees it
检查- Verify the input first.
- Check machine name, interfaces and discovery settings.
- Confirm the output name is unique.
Repair NDI network visibility before restarting or recreating the source module.