A Stream is an access object: it binds a protocol server, connection role and identity rule. Create it before handing URLs or stream keys to encoders and receivers.
Trước khi bắt đầu
A running SRT or RTMP server.
The intended role: publisher sends media; receiver consumes it.
A planned stream ID, stream key or allowed host that does not collide with another connection.
Giải thích cài đặt
Chỉ các điều khiển cần thiết cho vận hành viên được giải thích; tên trường nội bộ và sự kiện triển khai được chủ động ẩn.
Identity
Name the connection and choose its server.
- Name
Operator-facing name for the encoder, feed or receiver.
- Active
Allow the connection object to be used after it is saved.
- Protocol
Choose SRT or RTMP to match the owning server and client.
- Streaming server
Select the existing server that accepts this connection.
Access
Grant only the role and identity the client needs.
- Role
Publisher sends a feed; receiver reads a feed.
- Stream ID or stream key
Stable media identifier used by the client connection.
- Allowed host
Optional IP-based restriction for the connecting client.
Luồng đầu tiên an toàn
- 01
Open Streams and choose the same protocol as the target server.
- 02
Select the running server and choose Publisher or Receiver.
- 03
Set the stream identity or permitted host required by the server access policy.
- 04
Save and start the Stream.
- 05
Use the generated connection details in one real encoder or receiver and verify media.
Ví dụ luồng công việc
Give a remote encoder publisher-only access
An external operator should send one feed but must not receive other feeds.
Cách xây dựng
- 1
Create a Publisher Stream on the selected server.
- 2
Assign a unique stream ID/key or restrict the known encoder host.
- 3
Send only that connection detail to the encoder operator.
- 4
Start the encoder and verify that a different identity is rejected.
Create a receiver for a monitored output
A decoder or confidence monitor should read one named stream.
Cách xây dựng
- 1
Create a Receiver Stream on the server that owns the live feed.
- 2
Use the expected stream identity and optional receiver host restriction.
- 3
Connect the decoder with the generated receiver details.
- 4
Confirm playback and server-side connection state.
Xác minh kết quả
- The intended publisher or receiver connects with its assigned role.
- An incorrect stream identity is rejected when explicit access is enabled.
- The owning server and live statistics show the expected connection.
Khắc phục sự cố
A valid client is rejected
Kiểm tra- Compare protocol and selected server.
- Check role, stream identity and host restriction exactly.
Correct the single mismatched access value; do not enable allow-all as a diagnostic shortcut.