A Stream is an access object: it binds a protocol server, connection role and identity rule. Create it before handing URLs or stream keys to encoders and receivers.
قبل البدء
A running SRT or RTMP server.
The intended role: publisher sends media; receiver consumes it.
A planned stream ID, stream key or allowed host that does not collide with another connection.
شرح الإعدادات
نشرح عناصر التحكم التي يحتاجها المشغّل فقط، ولا نعرض أسماء الحقول الداخلية أو أحداث التنفيذ.
Identity
Name the connection and choose its server.
- Name
Operator-facing name for the encoder, feed or receiver.
- Active
Allow the connection object to be used after it is saved.
- Protocol
Choose SRT or RTMP to match the owning server and client.
- Streaming server
Select the existing server that accepts this connection.
Access
Grant only the role and identity the client needs.
- Role
Publisher sends a feed; receiver reads a feed.
- Stream ID or stream key
Stable media identifier used by the client connection.
- Allowed host
Optional IP-based restriction for the connecting client.
أول مسار آمن
- 01
Open Streams and choose the same protocol as the target server.
- 02
Select the running server and choose Publisher or Receiver.
- 03
Set the stream identity or permitted host required by the server access policy.
- 04
Save and start the Stream.
- 05
Use the generated connection details in one real encoder or receiver and verify media.
أمثلة لمسارات العمل
Give a remote encoder publisher-only access
An external operator should send one feed but must not receive other feeds.
كيفية بنائه
- 1
Create a Publisher Stream on the selected server.
- 2
Assign a unique stream ID/key or restrict the known encoder host.
- 3
Send only that connection detail to the encoder operator.
- 4
Start the encoder and verify that a different identity is rejected.
Create a receiver for a monitored output
A decoder or confidence monitor should read one named stream.
كيفية بنائه
- 1
Create a Receiver Stream on the server that owns the live feed.
- 2
Use the expected stream identity and optional receiver host restriction.
- 3
Connect the decoder with the generated receiver details.
- 4
Confirm playback and server-side connection state.
تحقق من النتيجة
- The intended publisher or receiver connects with its assigned role.
- An incorrect stream identity is rejected when explicit access is enabled.
- The owning server and live statistics show the expected connection.
استكشاف الأخطاء
A valid client is rejected
تحقق- Compare protocol and selected server.
- Check role, stream identity and host restriction exactly.
Correct the single mismatched access value; do not enable allow-all as a diagnostic shortcut.